Two Wärtsilä two-strokes complete tests

Wärtsilä X72

JUNE 17, 2014 — The Wärtsilä X72 and Wärtsilä X62 two-stroke engines have recently successfully passed important tests verifying various performance criteria.

The Wärtsilä X72 and Wärtsilä X62 engines cover the mid-bore end of the market. Typical applications include Panamax to Capesize bulk carriers (60,000 to 210,000 dwt), Aframax to Suezmax tankers (80,000 to 200,000 dwt), and container feeder vessels (1600 to 4500 TEU).

Both engines feature Wärtsilä’s second-generation version of its electronically controlled common rail system with time controlled fuel injection. They also feature a higher stroke to bore ratio than the RT-flex engines, thus achieving lower engine speed and lower brake specific fuel consumption (BSFC). The fuel injection and cylinder lubrication are controlled by a single electronic module, part of the state-of-the-art UNIC-flex control system, which is based on Wärtsilä’s UNIC (Unified Controls) platform.

The Type Approval Test (TAT) for the Wärtsilä X72 took place at the premises of Wärtsilä’s licensee, Doosan Engine Co. Ltd, in Changwon, South Korea. This was followed by a successful Sea Trial carried out by Dalian Shipbuilding Industry Corporation (DSIC).

In passing the TAT, the engine is verified as having fulfilled all classification society requirements, and is therefore fully introduced to the market. An important feature of the testing was meeting the SOLAS (Safety of Life at Sea) standards. With a single engine powering the propeller, the engine must be capable of continuous operation under all conditions.

“As expected, the TAT validation of the Wärtsilä X72 procedure has been passed successfully. The key value adding feature of this engine is that its high level of efficiency lowers the operational costs for owners, operators and charterers. In the current market conditions, this is extremely important,” says Mr Martin Wernli, Managing Director, Wärtsilä Switzerland and Vice President, Two-stroke, Wärtsilä Ship Power.

Also the first Wärtsilä X62 engine has successfully passed its Factory Acceptance Test (FAT). This milestone verifies that the engine meets the design criteria for performance and functioning, and that it has been accepted by both the customer, Kyklades Maritime Corporation, as well as by the classification society Det Norske Veritas (DNV).

The tests were carried out at the Hyundai Heavy Industries Engine and Machinery Division (HHI – EMD) factory in South Korea, where a series of four engines is being produced under license from Wärtsilä for Kyklades. The engines have been ordered to power four 115k Aframax Product Carriers being built by the HHI Gunsan shipyard.