Sweden’s Stena Line is making major upgrades to two of its RoPax ships— the Stena Lagan and sister ship Stena Mersey, both built in 2005 — that include cutting both ships and inserting new 36 meter extensions.
After extensive rebuilding, the Stena Lagan will be back in service for Stena Line at the beginning of 2021, while Stena Mersey is expected to reenter service later in 2021.
Stena group company Stena RoRo is responsible for the design and execution of the project.
The 36-meter extensions will give each of the ships a new total length of 222 meters and a cargo capacity of 2,875 cargo meters, an increase of 30 percent.
The Sedef Shipyard in Tuzla, Turkey, has been contracted to carry out the extensive transformation that began on the first vessel, the Stena Lagan, in August and is expected to be completed in January 2021.
“Extending vessels is a good and cost-effective way of quickly increasing capacity,” says Per Westling, president of Stena RoRo. “The ships will be both larger and significantly upgraded through this pioneering project. We are pleased to contribute to creating good value for the customer, as well as providing positive experiences for passengers and reduced environmental impact.”
The conversion also means that the number of cabins will be increased by 80 to a total of 200.
A new openable bow section to enable drive-through operation is being installed, which together with new internal ramps in both directions means more efficient loading and unloading.
With flap rudders and three bow thrusters, compared to the previous two, maneuvering of the extended vessels is also simplified. Installation of hybrid scrubbers for exhaust gas cleansing and a new purification system for ballast water effectively reduce the vessels’ environmental impact.
The passenger compartments will be upgraded with the current Stena Line design and expanded with new shops, as well as passenger lounges and a new sun deck. Passenger capacity will increase to accommodate 970 passengers.
“The project is both complicated and of considerable interest,” says Mikael Abrahamsson, in charge of the conversion and responsible for the 10-person project group on-site in Tuzla. “For the yard, this is a challenge in terms of time, complexity and scope, but they are ambitious and certainly up to the task, and we are satisfied with the collaboration.”
The conversions include:
- 36-meter extension (total new length, 222 meters)
- 30 percent increased cargo capacity (total 2875 lane meters)
- 80 new cabins
- Increased passenger car capacity with 100 cars
- New bow section with bow doors and ramp
- Straight drive-through configuration on two levels
- New internal ramps
- Installation of exhaust gas cleaning with hybrid scrubbers
- Flap rudders for better maneuverability
- Three bow thrusters (compared to the previous two)
- New purification system for ballast water
- Modernized passenger areas
- New shops
- New lounges with reclining chairs
- New sun deck
The lengthening of the two vessels is part of Stena Lines’ long-term investment plan to modernise its large European fleet of ferries, with major focus on efficiency and sustainability. In addition to the lengthening project, five next-generation ferries will be delivered during 2019-2022.