Sietas books order for wind farm jack-up
Hamburg’s J.J.Sietas is the first German shipbuilder to win an order to develop and build a jack-up vessel for offshore wind farm installation. The order is from Netherlands marine contractor Van Oord
Search Results for: marine construction
Kvichak building second cat for Long Beach Transit
Long Beach Transit has returned to Kvichak Marine Industries, Seattle, for a second Incat Crowther design catamaran. Its first, the Aqualink, has been shuttling visitors and commuters between the Long Beach downtown/waterfront
NSRP picks new projects for funding
The National Shipbuilding Research Program (NSRP) says its Executive Control Board has selected 13 new research and development projects for awards totaling approximately $1.3 million. The projects will come under the umbrella
Incat building LNG-fueled, gas turbine powered cat
Australian high-speed catamaran pioneer Incat is set to notch up another first. Under construction at its Hobart, Tasmania, shipyard is Hull 069, a 99 m cat that, says Incat, will be “the
ACP starts commissioning new tugboat series
Calovebora, the first in a series of thirteen Z-Tech tugboats built for ACP (the Panama Canal Authority) by Cheoy Lee Shipyards of Hong Kong is now in Panama. The 26-engine order for
Boost for Maryland offshore wind
Governor Martin O’Malley and the Maryland Energy Administration yesterday joined BOEMRE to announce that the federal government has accepted the planning recommendations of the Maryland Offshore Wind Task Force and yesterday. Yesterday it issued both a Request for Interest (RFI) and a map of an offshore wind leasing area in federal waters adjacent to Maryland’s Atlantic Coast. Maryland is the second state in the U.S. to reach this point in the process.
“Today’s announcement marks another step forward for Maryland’s new economy,” said Governor Martin O’Malley. “By harnessing the outstanding wind resources off of Maryland’s coast, we can create thousands of green collar jobs, reduce harmful air pollution, and bring much needed, additional clean energy to Maryland.”
Governor O’Malley has made offshore wind a priority in Maryland’s efforts to generate 20 percent of its energy from renewable sources by 2022, citing the potential for job creation and the abundant wind resources available. A one gigawatt offshore wind farm off of the Maryland coast could create as many as 4,000 jobs in manufacturing and construction during the five year development period, with an additional 800 permanent jobs once the turbines are spinning.
Yesterday’s announcement follows nearly two years of planning. The Maryland Department of Natural Resources worked with the Maryland Energy Administration, the Maryland Offshore Wind Task Force, and other outside partners like the University of Maryland’s Center for Integrative and Environmental Research, to develop a comprehensive understanding of the various environmental and stakeholder concerns that would impact any proposed offshore wind development. The result was a draft marine spatial planning area that represented the collective input of federal, state, and local stakeholders and formed the basis for the map released by BOEMRE.
The western edge of the RFI area for proposed wind generation is located approximately 10 nautical miles from the Ocean City coast and the eastern edge is approximately 27 nautical miles from the Ocean City coast.
Maryland offshore wind advocates say the state’s proximity to planned wind farms in the Mid-Atlantic, as well as the deep water port and manufacturing infrastructure in Baltimore, position it to be a leader not only in offshore wind energy generation, but also in ongoing construction and maintenance.
This summer, Governor O’Malley and Delaware Governor Jack Markell wrote to President Obama proposing a federal-state partnership for the development of a power purchase agreement for offshore wind energy. The development of one gigawatt of wind energy in the mid-Atlantic region could lead to the creation of thousands of clean energy jobs.
Also this summer, Governor O’Malley formally entered Maryland into a formal partnership in the newly formed Atlantic Offshore Wind Consortium. The group, comprising states along the Atlantic coastline and the United States Department of the Interior, will work to coordinate regionally prominent issues surrounding the development of off shore wind along the Atlantic outer continental shelf.
“Thanks to Governor O’Malley’s leadership Maryland is exceptionally well positioned to become leader in the emerging offshore wind industry, which has the potential to create or secure thousands of jobs and keep Maryland Smart, Green, and Growing,” said Malcolm Woolf, Director of the Maryland Energy Administration.
Dubai Drydocks launches jack-up
It is the second of two Service Jack units that the yard is building for Lysaker, Norway, headquartered Master Marine AS.
On completion next year, the vessel will commence a contract to install 88 wind turbines at the U.K.’s Shearingham Shoal field for Scira, a joint Statoil/Statkraft venture. The first vessel, Haven, was delivered from the Graha shipyard in June. It is now in southern Norway completing preparations for a three-year assignment as an accommodation unit at the Ekofisk field in the Norwegian sector of the North Sea.
Designed by Global Maritime, and classified by ABS, Nora is DP2 equipped and can jack-up in 80 m water depth. It has an open deck area of 2,500 sq. m and has accommodations for up to 260 people. It will be equipped with two pedestal cranes, each of 750 t capacity.
The vessel has a hull length of 110 m and breadth of 50 m It has four 130 m long legs and the spud can area of each leg is 180 sq.m.
November 6, 2010
Dubai Drydocks launches jack-up
It is the second of two Service Jack units that the yard is building for Lysaker, Norway, headquartered Master Marine AS.
On completion next year, the vessel will commence a contract to install 88 wind turbines at the U.K.’s Shearingham Shoal field for Scira, a joint Statoil/Statkraft venture. The first vessel, Haven, was delivered from the Graha shipyard in June. It is now in southern Norway completing preparations for a three-year assignment as an accommodation unit at the Ekofisk field in the Norwegian sector of the North Sea.
Designed by Global Maritime, and classified by ABS, Nora is DP2 equipped and can jack-up in 80 m water depth. It has an open deck area of 2,500 sq. m and has accommodations for up to 260 people. It will be equipped with two pedestal cranes, each of 750 t capacity.
The vessel has a hull length of 110 m and breadth of 50 m It has four 130 m long legs and the spud can area of each leg is 180 sq.m.
November 6, 2010
Damen books order for first Twin Axe Catamaran
More than a year in development, the Twin Axe HSSV design is a further development of Damen’s successful Sea Axe concept and the HSSV 2610 is particularly suited for offshore wind industry support.
Martijn Smit, Damen Sales Manager for Europe, says: “Given the tremendous potential growth in the offshore wind industry there is a great need for vessels to access turbines and this can often be in constraining weather conditions. We were driven to find a concept that improves on conventional catamaran designs.”
Managing Director of Marineco UK, Mike Conafray, adds: “As a company we have been monitoring the current vessels available that service the offshore wind farms but we never felt comfortable joining in with the existing vessels. When Damen came along to us with their proposals we quickly realized that by introducing them we would be able to offer the market a much enhanced vessel that would suit most of its needs.”
The Damen HSSV 2610 has been undergoing thorough testing at Delft University in the Netherlands.
“There have been ‘stunning’ results in the vessel’s seakeeping behavior, resistance and at the same time, it has much lower fuel consumption,” Mr. Smit says, adding that the design is an extension of the Damen enlarged ship concept.
“The raised work deck and sea axe bows enable the vessel to keep up its speed in a higher sea state and that is crucial for the offshore industry. And as many of the wind turbines will be located in challenging seas, this greatly extends the operating window.”
The new vessel has dimensions of 26 m x 10 m. It has accommodations for four crew and can transport 12 passengers.
Features include a 20 tm deck crane, a spacious diving platform, HP cleaning unit and extra mooring winches.
The vessel is thus suited for a diverse range of activities for supporting and supplying the offshore wind industry, as well as the wider offshore sector. Ample working and storage space on deck make it suitable for a variety of cargoes, including containers.
With a fuel capacity of 12,000 liters, t can be used tio transfer fuel to wind turbines.
Classed by Bureau Veritas, the vessel operates under the Workboat Code, Category 1.
Depending on the sea state, the maximum speed will be 26 knots with a range of 640 nm.
Currently under construction at Damen Gorinchem in the Netherlands, the vessel is expected to be ready by June 2011.
History
One of the largest circulation and most popular B to B marine magazines in the world, MARINE LOG carries on a tradition of marine industry journalism that extends back more than 130