Evergreen gears up for projected increase in intra-Asia trade

All twenty newbuildings are planned to be deployed in the intra-Asia trade. Evergreen believes that under the Regional Comprehensive Economic Partnership (RCEP) that is now being negotiated, the ASEAN countries, Australia, China, India, Japan, South Korea and New Zealand will remove trade barriers,  boosting regional cargo growth.

The first ship in CBC series is set to be delivered during the second half of 2017 with the completion of the CSBC series due by the first half of 2018. The first ship from Imabari Shipbuilding is planned to be delivered during the first half of 2018 with the completion of the series due by the first half of 2019.

Evergreen’s B-type vessels will be 211 meters in length, 32.8 meters wide, and have a design draft of 10 meters with a capacity of around 2,800 TEU. The ships are designed to load 13 rows of containers on deck, which is within the span of existing gantry cranes in the major ports on the intra-Asian trade.

The hull design of the vessels is wider in comparison to ships of a similar capacity, enabling the ships to navigate in the shallower ports encountered in the intra-Asia trade and to enhance their cargo carrying capability. The ships can cruise at a speed up to 21.8 knots, enhancing their on-time performance and competitiveness.

Vessels operating on regional trades, such as intra-Asia, often sail in coastal areas. To reduce their impact on port communities and eco-systems, Evergreen has imposed stringent eco-friendly criteria on their operation. The B-type vessels will be equipped with a range of environmental protection devices.They will have electronically-controlled fuel injection engines, meeting IMO Tier II standards for NOx emissions and Energy Efficiency Design Index (EEDI) requirements.

The agreement for B-type vessels is the third project in which Imabari will participate in Evergreen Line’s fleet renewal program. Evergreen has signed agreements with Shoei Kisen Kaisha, the ship owning arm of Imabari Shipbuilding Group, to charter five 14,000 TEU containerships to be delivered in 2017 and eleven 18,000 TEU containerships to be delivered in 2018 and 2019.

Evergreen gears up for projected increase in intra-Asia trade

All twenty newbuildings are planned to be deployed in the intra-Asia trade. Evergreen believes that under the Regional Comprehensive Economic Partnership (RCEP) that is now being negotiated, the ASEAN countries, Australia, China, India, Japan, South Korea and New Zealand will remove trade barriers,  boosting regional cargo growth.

The first ship in CBC series is set to be delivered during the second half of 2017 with the completion of the CSBC series due by the first half of 2018. The first ship from Imabari Shipbuilding is planned to be delivered during the first half of 2018 with the completion of the series due by the first half of 2019.

Evergreen’s B-type vessels will be 211 meters in length, 32.8 meters wide, and have a design draft of 10 meters with a capacity of around 2,800 TEU. The ships are designed to load 13 rows of containers on deck, which is within the span of existing gantry cranes in the major ports on the intra-Asian trade.

The hull design of the vessels is wider in comparison to ships of a similar capacity, enabling the ships to navigate in the shallower ports encountered in the intra-Asia trade and to enhance their cargo carrying capability. The ships can cruise at a speed up to 21.8 knots, enhancing their on-time performance and competitiveness.

Vessels operating on regional trades, such as intra-Asia, often sail in coastal areas. To reduce their impact on port communities and eco-systems, Evergreen has imposed stringent eco-friendly criteria on their operation. The B-type vessels will be equipped with a range of environmental protection devices.They will have electronically-controlled fuel injection engines, meeting IMO Tier II standards for NOx emissions and Energy Efficiency Design Index (EEDI) requirements.

The agreement for B-type vessels is the third project in which Imabari will participate in Evergreen Line’s fleet renewal program. Evergreen has signed agreements with Shoei Kisen Kaisha, the ship owning arm of Imabari Shipbuilding Group, to charter five 14,000 TEU containerships to be delivered in 2017 and eleven 18,000 TEU containerships to be delivered in 2018 and 2019.

Second “enhanced” RAmparts tug joins Harley Marine

The Lela Franco, named in honor of the  wife of HMS founder Harley Franco, is a sister ship to the Michelle Sloan delivered earlier this year. Designed by Robert Allan Ltd., both tugs were built at shipbuilder Diversified Marine Inc.’s Portland, OR, shipyard.

The Lela Franco is the sixth tractor tug HMS has added to its fleet in under two years, improving its ship assist and tanker escort capability and bringing more horsepower to the U.S. West Coast. Like its twin sister the Michelle Sloan, it is an enhancement of HMS tugs the Tim Quigg and John Quigg, built in 2004 also by DMI. These enhanced designs developed by Robert Allan Ltd. feature a wider hull, increased bollard pull performance, improved crew accommodations, and a modified skeg.

Particulars of the Lela Franco are as follows:

The tug was designed and constructed to satisfy all applicable USCG rules and regulations and meets or exceed classification society minimum scantling requirements. Tank capacities are as follows:Fuel Oil:          32,800

On trials, the vessel achieved an average bollard pull, ahead, of 69.0 short tons and a maximum of 71.3 short tons, Astern, average bollard pull was 65.4 short tons and maxium was 67.4 short tons.  Free running speed, ahead, was 12.5 knots   

The vessel has been outfitted to the highest standards for a normal operating crew of two, with accommodations for up to six persons. The Master’s cabin is located on the main deck, with two additional double crew cabins located on the lower accommodation deck. There is also a galley and mess room located on the main deck.

The deck machinery comprises a Markey DEPC-48 render-recover type ship assist hawser winch on the bow, spooled with 500′ of 9″ line, and a Markey DEPC-32 towing winch aft with a capacity of 250′ of 6-1/2″ line. In addition, a capstan is installed on the fore deck to facilitate line handling operations.

The raised forecastle and elevated wheelhouse ensure good all-round visibility of the working decks and when handling large barges with high freeboard. The higher freeboard feature also provides a high standard of seakeeping when working in exposed waters, but is configured so as not to impede the ability of the tug to work closely under the flare of the newer generation of large ships.

Main propulsion power for each tug is provided by a pair of CAT 3516C diesel engines, each rated 2,575 bhp at 1,600 rpm, and each driving a Rolls-Royce US 205 Z-drive unit, with a 94.5″ diameter fixed pitch propeller.

The electrical plant consists of two (2) identical CAT C6.6 diesel gen-sets, each with a power output of 125 ekW, 60 Hz.

Ship-handling fenders at the bow consist of one tier of 36″ OD x 18″ ID cylindrical fender at the main deck level, with 12″ loop type Schuyler fenders between the main deck and the knuckle, 11″ laminated bow fenders below, and 12″ hollow D style fenders along the stem and skeg. Tires and 8″ hollow “D” fender provide protection at the main and forecastle sides and sheer lines, and 12″ loop type fendering is used at the stern.

llela francoGA

Valmet automation picked for LNG fueled Tallink ferry

SEPTEMBER 8, 2015 — Espoo, Finland, headquartered Valmet Corporation will supply an automation system for the LNG-powered fast ferry ordered by Estonia’s AS Tallink Grupp at shipbuilder Meyer Turku Oy for its

MOL fits a box ship with a windshield

SEPTEMBER 3, 2015 — Japan’s Mitsui O.S.K. Lines, Ltd. (MOL) has started demonstration tests of a new windshield for containerships that, it says, has the potential to reduce wind resistance, save fuel,

LaNaval poised to ink order to build two LNG fueled ferries

SEPTEMBER 3, 2015 — Spain’s Baleària Group has reached an agreement with shipbuilder Construcciones Navales del Norte – La Naval for the construction of two natural gas fueled ferries. The agreement is

Rolls-Royce to design and equip advanced shrimp vessel

SEPTEMBER 2, 2015 — A shrimp stern trawler ordered from shipbuilder Vard Group by a Canadian company is to be designed and equipped by Rolls-Royce. The contract is worth over £6 million

Halifax Shipyard starts production of first AOPS

SEPTEMBER 2, 2015 — Hundreds of employees yesterday gathered in the new Assembly Hall at Irving Shipbuilding’s Halifax Shipyard in Halifax, Nova Scotia, to celebrate the start of production of the first

Wartsila wins regas module orders for two FSRUs

AUGUST 31, 2015 — South Korean shipbuilder Hyundai Heavy Industries (HHI) has placed contracts with Wärtsilä for seawater/propane based regasification modules. The systems are to be installed on FSRU (Floating Storage and

Wartsila 34DF racks up LNG carrier successes

AUGUST 27, 2015 – Wärtsilä says that the upgraded version of the Wärtsilä 34DF engine is rapidly becoming established as an industry standard with the three major South Korean shipbuilders are supporting

LOAD MORE