Shell cuts steel for LNG bunker vessel

The steel cutting ceremony took place at the shipyard December 4, with representatives from Shell and the shipbuilder in attendance.The new LNG bunker vessel will be based at the port of Rotterdam in the Netherlands, and will load from the new LNG break bulk terminal currently under construction by the Gas Access to Europe terminal. Once ready, it will deliver to LNG-fueled vessels in northwest Europe. The vessel is also seagoing and, therefore, able to bunker customers at other locations.

Shell says the vessel will be “pioneering in design.” It will have a capacity to carry 6,500 cu. m of LNG fuel and will be highly efficient and maneuverable. Featuring an innovative transfer system and sub cooler unit, it will be able to load from large or small terminals and able to bunker a wide variety of customer vessels.

Finland’s Containerships Ltd Oy will be the launch customer for the vessel’s services, after signing an LNG supply agreement with Shell on November 24.

As we reported earlier, Containerships Ltd Oy is to charter the two 1,400 TEU LNG fueled containerships currently being built for Nordic Hamburg Group at China’s Yangzhou Guoyu Shipyard .

The vessels will receive LNG fuel from Shell at the port of Rotterdam, after the LNG bunker vessel becomes operational in mid-2017.”This is a significant landmark in bringing this innovative LNG bunker vessel with cutting-edge technology to reality,” said Dr Grahaeme Henderson, Vice President of Shell Shipping & Maritime.

“I am delighted to be working with STX on this project and Shell is proud to be leading in the development of LNG fuel in shipping.””The supply agreement between Shell and Containerships is another example of the marine LNG fuel supply chain coming together,” says Lauran Wetemans, Shell’s General Manager Downstream LNG. “Working together with customers like Containerships is critical to encourage the use of LNG as a fuel in the marine sector, and we’re committed to helping make the transition to LNG.”

LNG bunker vessel

ShellLNGBunkervessel

 

Navy awards Ingalls $200 million LPD 28 contract

.

 

According to defense media, BIW will get the additional destroyer under a “hull swap” agreement in a 2002 MOU between the Navy and its two largest shipbuilders that, among other things, reportedly included an agreement that, should a twelfth LPD be ordered,a fourth DDG 51-class ship or equivalent workload would be awarded to BIW.

Apparently, that’s likely to happen and that destroyer will be DDG 127, once Congress comes through with the funding.

However all that works out, the funds awarded Huntington Ingalls under the contract announced today will be used to purchase long-lead-time material and major equipment, including main engines, diesel generators, deck equipment, shafting, propellers, valves and other long-lead systems.

“This funding demonstrates the priority the Navy places on Ingalls getting started on this important ship,” said Ingalls Shipbuilding President Brian Cuccias. “Our shipbuilders have made great strides in the LPD program, and we are performing well. Building LPD 28 is key to maintaining a reliable supplier base and leverages our hot production line, enabling our team of shipbuilders to build this ship and future amphibious warships as efficiently and as affordably as possible.”

Ingalls’ 10th San Antonio-class LPD, John P. Murtha (LPD 26), was the most complete and lowest-cost LPD when launched, with many key systems finished months ahead of the shipyard’s historic best in the program.

Though LPD 28 will be substantially similar to its predecessors, it won’t have quite the same appearance. Gone will be the towering enclosed masts that had been built at HII’s now-closed Gulfport, MS Composites Center of Excellence facility, in their place will be open masts similar to those on the DDG 51 destroyers.

The 684-foot-long, 105-foot-wide LPD 17 class ships are used to embark and land Marines, their equipment and supplies ashore via air cushion or conventional landing craft and amphibious assault vehicles, augmented by helicopters or vertical takeoff and landing aircraft such as the MV-22 Osprey. The ships support a Marine Air Ground Task Force across the spectrum of operations, conducting amphibious and expeditionary missions of sea control and power projection to humanitarian assistance and disaster relief missions throughout the first half of the 21st century.

Rolls-Royce wins China AHTS equipment order

The contract is to equip nine SPA80A Anchor Handling Tug Supply vessels to be designed and built by Sinopacific Shipbuilding Group and owned and operated by the Abu Dhabi National Oil Company (ADNOC) and its wholly-owned subsidiary, ESNAAD.

The vessels will be built at Sinopacific’s Zhejiang Shipyard and the first vessel is due for delivery in 2017.

Each ship will have a bollard pull of 80 metric tonnes will be equipped with Bergen diesel engines, main and tunnel thrusters, electrical power system and a deck machinery package from Rolls-Royce.

“The visit of Rolls-Royce senior executives to Sinopacific in 2013 reinforced the relationship between our two companies as did the provision of  Rolls-Royce integrated equipment packages for Sinopacific’s in-house designed SPA150 AHTS series. This was a first for Rolls-Royce in the Chinese market,” said SinJiang Qiang, Chief Executive Officer of Sinopacific. “The Rolls-Royce Chinese team has provided us with great support by staying close, enhancing communications and giving us confidence for future cooperation. Sinopacific aims to work closely with our strategic partners, such as Rolls-Royce, presenting the best products and services for our ship owners while strengthening our leadership in the most demanding markets.”

“This is a significant contract. It demonstrates our market leading capabilities in a wide range of offshore marine products, and our ability to combine them in a way that creates real value for our customers,” said Richard Wang, Rolls-Royce, Senior Vice President Commercial – Marine.  “We look forward to working with and continuing a profitable and long-lasting relationship with Sinopacific.”

ABS teams with SDARI on next generation feeder vessel

ABS Senior Vice President and Chief Technology Officer Howard Fireman and SDARI President Jintao Hu signed the agreement yesterday in Shanghai, China. Dr. Christina Wang, Vice President of ABS Operational and Environmental Performance (OEP), Dr. Franck Violette, Director of ABS OEP China, and Gangyi Wang, Vice President of SDARI also attended the signing ceremony.

“Changing environmental regulations, unpredictable energy prices and volatile freight rates have made it imperative for ship designers to continuously improve the operational and environmental performance of their next generation designs,” Mr. Fireman said. “ABS is working with industry as designs change and new concepts are introduced.”

The objective of this project is to develop the next-generation feeder design with a focus on operational efficiency and flexibility.

The project will bring together innovative design and technology solutions with a novel concept that incorporates technology-readiness features to enable cost-effective implementation of present and future regulations by applying extensive life-cycle cost analyses. This innovative feeder container carrier design will meet future market and trade needs that are being driven by the increase in ultra-large container carriers and the growth of specific regional markets.

“SDARI has always promoted ship innovation and technology development. At this crucial moment when China is transforming from shipbuilding nation to a shipbuilding power, the collaboration that we have strengthened with ABS in container carriers positions us to generate new concepts based on market demand and to launch cutting-edge products,” says Jintao Hu, “I believe the development of this new generation of feeder container carriers will further strengthen the partnership between SDARI and ABS, promoting the transformation and upgrading of Chinese shipbuilding industry.”

WinGD DF engines to power MOL LNG newbuild

The vessel will be engaged in a 20-year free-on-board (FOB) off-take of approximately 800,000 tons per year of LNG, sourced from U.S.Gulf liquefaction projects, including the planned terminal near Freeport, Texas.

The official contract for the vessel between MOL and DSME was signed in February 2015 and the decision to adopt WinGD X-DF engines was taken in August. The first engine is due for delivery to the shipyard in June 2017.About WinGD low-pressure DF

The low-pressure gas admission system used by WinGD on its X-DF engines draws on Wärtsilä’s long experience with what has become a well-proven industry standard technology on medium-speed dual-fuel engines. In contrast to high-pressure gas injection engines that operate on the Diesel cycle, WinGD’s low-pressure DF system works on the lean burn Otto cycle – i.e. ignition of a compressed lean air-gas mixture by injection of a small amount of liquid fuel.

Results from the X-DF technology demonstrator engine that WinGD operates jointly with licensee Diesel United at its Aioi, Japan, factory show that the WinGD low-pressure gas admission is characterized by stable combustion, inherently low NOx emissions and high overall system efficiencies. In terms of NOx, WinGD X-DF engines undercut IMO Tier III limits for Emission Control Areas (ECAs) by considerable margins without any additional measures, such as EGR or SCR.

With low-pressure gas admission the gas fueling system on X-DF engines does not require a high-pressure electrically-driven compressor, reducing equipment costs, onboard energy consumption and maintenance.

“With the imminent implementation of the IMO Tier III regulations in Emission Control Areas for new vessels, we are registering an increasing interest in our X-DF series from markets worldwide, especially for the propulsion of LNG carriers,” says Rolf Stiefel, Vice President Sales and Marketing at WinGD.

Wartsila solutions chosen for first LNT A-BOX LNG carrier

The vessel is being built for Saga LNG Shipping Pte. Ltd., a new LNG player backed by Shanghai based Landmark Capital, at China Merchants Heavy Industry’s Haimen based shipyard in China’s Eastern Jiangsu province.

Originally, plans were to build the ship at Xiamen Shipbuilding Industry, but, for undisclosed reasons, the project was delayed and to meet strict deadlines with potential end-users, the project was moved to another shipyard.

Now set to be delivered in early 2018, the vessel will be the to utilize the LNT A-BOX containment system (see earlier story), licensed and designed by another company backed by Landmark Capital, LNG New Technologies (LNT).

Wärtsilä has been contracted to supply the complete cargo handling system including the fuel system, as well as the main propulsion system.

The Wärtsilä cargo handling system for LNG carriers has an integrated fuel system utilizing both compressors and forced vaporizing. The automation and safety control systems are state-of-the-art, while the Wärtsilä cargo pumps include the EFP pump series, the latest development for LNG fuel and spray.

The total solution package comprising the cargo and propulsion systems is designed to attain maximum overall efficiency for the vessel, thereby producing notable savings in operating costs. Furthermore, the total solution concept minimizes interfacing and system design risk during the vessel building process.

“This will be a very modern and highly efficient LNG Carrier and we were selected because our technologies in both the propulsion equipment and cargo handling are world leading,” says Timo Koponen, Vice President, Flow and Gas Solutions, Wärtsilä. “The new ship has been designed for worldwide trade of LNG, but with special consideration given to the reloading of cargoes and local and regional trading. Therefore, the cargo handling system and the fuel efficiency of the engine have to be the most efficient possible. Our unmatched track record with proven LNG technologies and dual-fuel solutions was a key factor in the award of this valuable contract.”

Wärtsilä’s scope of supply includes a comprehensive propulsion package comprising a 12-cylinder Wärtsilä 50DF dual-fuel main engine, 6-cylinder and 8-cylinder Wärtsilä 20DF dual-fuel generating sets, a Wärtsilä controllable pitch propeller (CPP), a Wärtsilä Energopac efficiency rudder, a Wärtsilä gearbox, and a Wärtsilä tunnel thruster.

Delivery of the Wärtsilä equipment to the shipyard will commence in late 2016.

Wartsila solutions chosen for first LNT A-BOX LNG carrier

Wärtsilä has been contracted to supply the complete cargo handling system including the fuel system, as well as the main propulsion system.

The vessel is being built for Saga LNG Shipping Pte. Ltd., a new LNG player backed by Shanghai based Landmark Capital, at China Merchants Heavy Industry’s Haimen based shipyard in China’s Eastern Jiangsu province.

Originally, plans were to build the ship at Xiamen Shipbuilding Industry, but, for undisclosed reasons, the project was delayed and to meet strict deadlines with potential end-users, the project was moved to another shipyard.

lntabox300Now set to be delivered in early 2018, the vessel will be the to utilize the LNT A-BOX containment system (see earlier story), licensed and designed by another company backed by Landmark Capital, LNG New Technologies (LNT).

The Wärtsilä cargo handling system for LNG carriers has an integrated fuel system utilizing both compressors and forced vaporizing. The automation and safety control systems are state-of-the-art, while the Wärtsilä cargo pumps include the EFP pump series, the latest development for LNG fuel and spray.

The total solution package comprising the cargo and propulsion systems is designed to attain maximum overall efficiency for the vessel, thereby producing notable savings in operating costs. Furthermore, the total solution concept minimizes interfacing and system design risk during the vessel building process.

“This will be a very modern and highly efficient LNG Carrier and we were selected because our technologies in both the propulsion equipment and cargo handling are world leading,” says Timo Koponen, Vice President, Flow and Gas Solutions, Wärtsilä. “The new ship has been designed for worldwide trade of LNG, but with special consideration given to the reloading of cargoes and local and regional trading. Therefore, the cargo handling system and the fuel efficiency of the engine have to be the most efficient possible. Our unmatched track record with proven LNG technologies and dual-fuel solutions was a key factor in the award of this valuable contract.”

Wärtsilä’s scope of supply includes a comprehensive propulsion package comprising a 12-cylinder Wärtsilä 50DF dual-fuel main engine, 6-cylinder and 8-cylinder Wärtsilä 20DF dual-fuel generating sets, a Wärtsilä controllable pitch propeller (CPP), a Wärtsilä Energopac efficiency rudder, a Wärtsilä gearbox, and a Wärtsilä tunnel thruster.

Delivery of the Wärtsilä equipment to the shipyard will commence in late 2016.

World’s greenest cruise ship to be unveiled at COP21

 

That’s the hope of the Japan based Peace Boat, an NGO that has Special Consultative Status with the Economic and Social Council of the UN and serves as an official messenger for projects including the UNISDR Resilient Cities Campaign.

Nominated for the Nobel Peace Prize in 2008, Peace Boat’s main means of taking its message to the world is through its ship, currently the chartered in Ocean Dream (which was delivered in 1982 as Carnival Cruise Line’s first newbuild, the Tropicale).

Since its establishment in 1983, and using a variety of ships,  Peace Boat has organized over 80 voyages, carrying more than 50,000 people to over 180 ports.

Now, though, Peace Boat has scheduled a briefing that will be held December 5 in Paris during the COP21 conference. It will reveal more details of the design for its Ecoship, which it says will be the  world’s “greenest” cruise ship, along with its plans for the ship’s maiden voyage in 2020.

The plans for the future-ready 55,000 ton Ecoship have been developed by a team of over 30 engineers, scientists and thinkers from the fields of shipbuilding and  eco-technology (including renewable energy, architecture, and waste management).

With a hull form inspired by the whale, the vessel’s ecologically friendly features include 10 retractable solar-paneled sails and retractable wind generators, as well as a future-ready hybrid engine.

Peace Boat says that with its energy efficiency and projected cuts in CO2 emissions its Ecoship will be the flagship for green technology in passenger shipping, serving as a model for cruise operators worldwide.

“Peace Boat’s 2020 launch of the Ecoship offers a vision for a climate-friendly future and can lead the way towards a green cruising model that can also impact the wider shipping industry. The industry must adapt to the planet’s needs,” says Yoshioka Tatsuya, Founder and Director of Peace Boat.

“We are delighted to see wind propulsion being used on this innovative cruise ship design. The Ecoship will be a front runner in the design of lower impact cruise vessels and we will be working with the industry segment to help bring more wind propulsion solutions into the mix,” says Gavin Allwright, Secretary of the International Windship Association (IWSA), “IWSA has recently welcomed Peace Boat onboard as one of our newest members, and we look forward to working together over the coming years, helping to spread the message of low carbon, sustainable shipping worldwide.”

Algoma adds more Equinox newbuilds to order book

Today, Algoma said that contracts for two ships had been made effective with the delivery of refund guarantees by the shipyard, China’s Jiangsu Yangzijiang Shipbuilding Co. Ltd.

“Our search for a shipyard in China to replace the now-bankrupt Nantong Mingde Heavy Industries (“Mingde”) led us to Yangzijiang,” said Ken Bloch Soerensen, President and CEO of Algoma. “We have been pleased with the professionalism and enthusiasm the yard has shown for our project and the quality that they have shown on work done for other shipowners.”

The announcement of the two ship order at Yangzijiang follows a November 25 announcement that contracts for three Equinox newbuilds with Uljanik d.d. of Croatia had become effective with delivery by the yard of security for the contractually required construction installments.

Algoma now has five Equinox Class ships under construction at the Uljanik Group’s 3Maj shipyard in Rijeka.All the vessels will have an overall length of 225.55 metres (740 feet) and a beam of 23.77 metres (78 feet), qualifying as Seaway Max size ships. The vessels will carry 29,300 tonnes at maximum Seaway draft.

The two most recently ordered at Uljanik will feature a boom-forward configuration designed to provide greater flexibility in certain delivery situations. The others will feature a standard rear boom.

The new Equinox vessels will have all of the features of the existing Equinox design, including the exhaust gas scrubber technology pioneered by Algoma on the Great Lakes in its first Equinox Class gearless bulk carriers.

With seven ships now under construction, Algoma expects to invest approximately $450 million in this phase of its fleet renewal program. It is also reviewing its fleet plan and considering the retirement of certain older vessels.

Canada to go ahead with box ship to oiler conversion at Davie

The project will see the Quebec shipbuilder continue with the conversion of a containership into an interim fleet oiler for the Royal Canadian Navy. Until now, Davie has been working on the basis of an letter of intent from the previous government.

Timely continuation of the project was put in doubt when rival Irving Shipbuilding wrote letters to members of the incoming cabinet asking that its alternative solution be considered. That move provoked a lot of unhappiness among the rest of the Canadian shipbuilding community.

Today, though, Minister of Public Services and Procurement Judy M. Foote and Minister of National Defence Harjit Singh Sajjan issued the following statement:

The Government of Canada was recently briefed on the interim auxiliary oil replenishment file. We know that this process commenced as a result of an expression of interest by Chantier Davie Canada Inc. We also know that the previous government made a decision to proceed with this proposal through a sole-source rather than a competitive process. The previous government also modified the long-standing procurement rules governing contracts for interim defence requirements.

We have taken time to assess all these facts and have also taken the following into consideration:The process is at an advanced stage. If we restarted this initiative by launching a competition, we would lose precious time in providing the Navy with a critical refuelling and naval support capability.

The ship has been purchased by Chantier Davie Canada Inc. and is in the shipyard undergoing conversion.

According to public reports, several hundred employees have already been hired.

Due to the structure of the agreement entered into by the previous government, we will be required to pay up to $89 million in expenses should we not proceed with this initiative.

After amassing the facts and carefully deliberating, The Government of Canada determined that proceeding with Project Resolve is the most viable course of action to provide the Navy’s at-sea oil replenishment capability until the Joint Support Ships, to be built by Seaspan’s Vancouver Shipyards, are operational. The Government of Canada is committed to ensuring that competitions for major military procurements stand up to the highest standards of openness and transparency.

Furthermore, The Government of Canada will undertake a review of the process for sole-source contracts for military procurements, including looking at current regulations and policies and those regulations amended by the previous government.
vailability of RCN ships has increased in the immediate term with the completion of the first modernized frigates and now that the Victoria-class submarines have achieved a steady state level of readiness, and will further increase in the short-term with interim AOR capability and in the medium-to-longer term with the Joint Support Ships, Arctic/Offshore Patrol Ships, and Canadian Surface Combatants that will be delivered as part of Government shipbuilding.

LOAD MORE