Brazil’s ETP delivers two Incat Crowther fast supply vessels

Named Baru Providencia and Baru Antares, they are the third and fourth in a 12 boat series built for Baru Offshore.

The designs have been optimized to comply with the UT4000 Fast Supply Vessel specification. Ship’s fuel is in excess of 40,000 liters, with a cargo fuel load of 90,000 liters. There is also capacity for 90,000 liters of cargo fresh water.

The vessels are dominated by an expansive aft deck of 225 square meters of usable area, planked with hardwood and protected by sturdy cargo rails.

An additional 30 sq. meters of cargo area is provided inside the main deck cabin, allowing for the carriage of items out of the elements, such as food and other supplies. Also housed in the main deck cabin are wet room and laundry facilities.

The upper deck wheelhouse includes an aft facing control station allowing for safe and efficient maneuvering.

Below decks are six cabins, accommodating 11 crew, as well as a mess, galley and bathrooms.

The vessels are powered by a quartet of Cummins QSK 50 main engines, each rated at 1,800hp @ 1,800 rpm.

Electrical requirements are met by two two Cummins QSM 11 gensets, each rated at 280 ekW

Propulsion is by four fixed-pitched propellers, with two 150 hp electric tunnel bow thrusters enhancing maneuverability.

The vessels have a service speed of 21 knots and a maximum speed of 25 knots.

DSME hit by second fatal fire within months

It is the second fatal blaze at the shipyard in just a few months and there appear to be close parallels in the two incidents.

Two people died in an August 24 fire onboard an LPG tanker under construction at the yard and, in that fire too, another seven were injured.

Today’s fire, like the earlier one, was reportedly aboard a gas carrier and in both cases sparks from a welder’s torch were initially identified as the likely cause.

Joe Mayhall joins Bollinger Shipyards

“I am pleased to announce the addition of Joe Mayhall to the Bollinger family of employees,” said President and CEO Ben Bordelon. “In his new role of Vice President, Commercial Business Development, Joe will have commercial sales and marketing responsibilities for Bollinger as well as Tampa Ship. Joe brings to the table 23 years as a solid contributor in shipyard sales and marketing. His knowledge and understanding of the industry will open new doors and new markets for Bollinger as well as expand on our existing new construction and repair efforts. Joe is a strong addition to our team and I am excited to see his impact on our business.”

Mr. Mayhall is a veteran of new construction and ship repair sales and has worked in increasingly responsible positions, overseeing blue water ship repair and new construction sales in the oilfield and passenger vessel markets as well as coordinating advertising and marketing.

Chouest said to have canceled Arctic AHTS duo

 

Designed by ECO’s North American Shipbuilding, Larose, LA, the vessels were to be built to Polar Class 3, equipped to operate in arctic waters with air temperature down to minus 40 degrees Celsius.

The reported Chouest cancelation of the pair comes in the wake of Shell’s recent decision to halt its operations offshore Alaska for the “foreseeable future.”

Delivery of first Arctic AHTS from LaShip shipyard had been slated for end 2016.

VT Halter launches 130 ft ATB tug for Bouchard

 

The vessel is one of two sister vessels being built under a two vessel contract signed with Bouchard Transportation, Inc. in August 2014. Morton S. Bouchard and sister vessel Frederick E. Bouchard each measure 130 feet by 38 feet by 22 feet and is classed by ABS as +A1 Ocean Towing , Dual Mode ATB, USCG Subchapter C. On completion, both tugs will be equipped with an Intercon Coupler System. Deliveries are expected in January and May 2016 respectively. The vessels will enter into Bouchard Transportation’s fleet service in New York, N.Y.

This most recent launch follows the September launch from the Moss Point shipyard of another ATB tug for Bouchard, the 10,000 hp M/V Donna J. Bouchard.

Also equipped with an Intercon Coupler, Donna J. Bouchard, is classed by ABS as +A1 Towing Vessel, Dual Mode ATB, USCG Subchapter M.
She will be paired with barge B.No.272, which is currently under construction at VT Halter Marine’s Pascagoula, MS, shipyard to comprise the second ATB unit built for Bouchard Transportation as part of its major expansion program.

“Bouchard Transportation Co. Inc. is happy to announce yet another successful launching of a state of the art ATB tug built by VT Halter Marine. The launching of the M/V Morton S. Bouchard Jr. is a special event within the Bouchard Family, for the vessel is named after the father of President/CEO, Morton S. Bouchard III, who wanted his father’s name to always remain on the waterfront for which he dedicated his entire fife to. The original tug, Morton S Bouchard Jr., which was also built by Halter, was earlier renamed as The Bouchard Boys and continues to operate with Bouchard Fleet,” said Morton S. Bouchard III President and CEO, Bouchard Transportation.

“The successful launching of both vessels, the M/V Morton S. Bouchard Jr. today and the M/V Donna J. Bouchard in September is an indication of the commitment to the continued relationship with Bouchard Transportation. We are pleased and proud to celebrate this important milestone in the life of any vessel, and we look forward to having these superb tugboats join the Bouchard Transportation fleet,” said Jack Prendergast, CEO, VT Halter Marine

 

Aker Philly facing higher costs, delivery delays

The company, which is planning to change its name to Philly Shipyard, reported an order backlog of $1,043.2 million as of September 30, 2015, providing for shipbuilding activity with delivery dates through 2018.

In its third quarter report, the company says that it has recently completed a thorough analysis of its production schedule and budgets based on its experiences with the construction activities on the current product tanker program and the purchasing and engineering activities on the two containership’s on order by Matson project.

“As a result of this analysis,” it says, it has “prepared a revised forecast which includes higher costs of construction and later delivery dates for the vessels in AKPS’s backlog than previous forecasts. Corrective actions have been put in place to address some of these additional costs and schedule impacts.”

MORE

Future USNS Brunswick completes Acceptance Trials

The ship, which was constructed by shipbuilder Austal USA, is the sixth in the EPF class. The EPF class ships were formerly known as Joint High Speed Vessels, or JHSVs. In September, the Secretary of the Navy brought in a new E ship class designator that, in addition to seeing the Joint High Speed Vessel (JHSV) become the Expeditionary Fast Transport, or EPF, sees the Mobile Landing Platform (MLP) become the Expeditionary Transfer Dock, or ESD; and the Afloat Forward Staging Base (AFSB) variant of the MLP become the Expeditionary Mobile Base, or ESB. 

“Conducting Acceptance Trials is a major milestone for the shipyard and the program office,” said Capt. Henry Stevens, Strategic and Theater Sealift Program Manager, Program Executive Office, Ships. “We are very proud of our contractor and government team’s commitment to delivering affordable, quality ships and look forward to the delivery of EPF 6 later this year.” 

The ship’s trials included dockside testing to clear the ship for sea and rigorous at-sea trials during which the Navy’s Board of Inspection and Survey (INSURV) evaluated and observed the performance of EPF 6’s major systems.

Completion of Brunswick’s Acceptance Trials signifies that the ship is ready for delivery to the fleet in the near future.

“We’re proud to have successfully completed acceptance trials for USNS Brunswick, and excited to see the continued improvement ship to ship on this mature program,” said Craig Perciavalle, Austal USA’s president. “Austal’s EPF team continues to do a tremendous job constructing incredible ships and preparing them to enter the fleet.”

The Brunswick is the sixth ship in Austal’s 10-ship $1.6 billion EPF block-buy contract awarded by the U.S. Navy in 2008. Three more under construction at Austal’s Mobile, AL, shipyard.

EPFs are versatile, non-combatant, transport ships that will be used for fast intra-theater transportation of troops, military vehicles, and equipment. EPF is designed to commercial standards, with limited modifications for military use. The vessel is capable of transporting 600 short tons 1,200 nautical miles at an average speed of 35 knots, and can operate in shallow-draft ports and waterways, interfacing with roll-on/roll-off discharge facilities, and on/off-loading vehicles such as a combat-loaded Abrams Main Battle Tank. Other joint requirements include an aviation flight deck to support day and night aircraft launch and recovery operations.

EPF 6 will have airline style seating for 312 embarked forces, with fixed berthing for 104.

The EPF’s large, open mission deck and large habitability spaces provide the opportunity to conduct a wide range of missions.

“We’re excited about the feedback we’re receiving about how well these ships are doing on deployment and about the overall potential of the program,” said Mr. Perciavalle.

In addition to the EPF program, Austal is also building 10 Independence-variant Littoral Combat Ships (LCS) for the U.S. Navy under a $3.5 billion block-buy contract. Three LCS have been delivered while an additional six are in various stages of construction.When it was launched at Austal’s Mobile, AL, shipyard in May EPF 6 was JHSV 6.

CBO says Navy 2016 shipbuilding plan won’t work

Here’s how the CBO see things.

CBO says it estimates that the cost of the Navy’s 2016 shipbuilding plan—an average of about $20 billion  per year (adjusted for inflation) over 30 years—would be $4 billion higher than the funding that the Navy has received in recent decades.

The Department of Defense (DoD) submitted the Navy’s 2016 shipbuilding plan for fiscal years 2016 to 2045 in April 2015. The $20 billion total annual cost of carrying out the 2016 plan over the next 30 years, CBO estimates—would be one-third more than the amount the Navy has received in Congressional appropriations for shipbuilding in recent decades.

The Navy’s 2016 shipbuilding plan, says CBO, is similar to its 2015 plan with respect to the goal for the total number of battle force ships, the number and types of ships the Navy would purchase, and the funding proposed to implement its plans.

The Navy Plans to Expand the Fleet to 308 Battle Force Ships

The Navy’s 2016 shipbuilding plan states that the service’s goal (in military parlance, its requirement) is to have 308 battle force ships, consisting of aircraft carriers, submarines, surface combatants, amphibious ships, combat logistics ships, and some support ships. The 2016 shipbuilding plan falls short of the goals for some types of ships in some years, although generally the shortfalls are smaller than they have been in previous years’ plans. The fleet today numbers 273 ships.Under the 2016 plan, the Navy would buy a total of 264 ships over the 2016–2045 period: 218 combat ships and 46 combat logistics and support ships.

Given the rate at which the Navy plans to retire ships from the fleet, says CBO the 2016 plan would not meet the inventory goal of 308 ships until 2022, but it would allow the Navy to maintain its inventory at least at that level through 2031. After that, in most years through 2045, the fleet would fall below 308 ships.

The size of the Navy does not depend on ship construction alone; the length of time that particular ships remain in the fleet affects the force structure as well. The CBO notes that the Navy often shows flexibility in its approach to retiring ships: A ship may be retired before the end of its service life to save money or may be kept beyond that span to maintain a desired force level. Generally, the Navy’s estimates of expected service life align with historical experience.
However, the Navy currently assumes a 35- or 40-year service life for its large surface combatants; in the past, few of those ships were in the fleet for longer than 30 years.

CBO Estimates That Spending for New Ships in the Navy’s Plan Would Average $18.4 Billion per Year

The Navy estimates that buying the new ships specified in the 2016 plan would cost $494 billion (in 2015 dollars) over 30 years—or an average of $16.5 billion per year—slightly less than the costs of the 2015 plan. Using its own models and assumptions, CBO estimates that the cost of new-ship construction in the Navy’s 2016 plan would total $552 billion over 30 years, or an average of $18.4 billion per year.

CBO’s estimates are higher because the Navy and CBO use different estimating methods and assumptions regarding future ships’ design and capabilities and treat growth in the costs of labor and materials for building ships differently.

CBO’s constant-dollar estimate is 8 percent higher than the Navy’s for the first 10 years of the plan, 12 percent higher for the following decade, and 17 percent higher for the final 10 years (see figure).

The difference widens over time in part because the Navy’s method of developing constant-dollar estimates (which differs from CBO’s method) does not account for the faster growth in the costs of labor and materials in the shipbuilding industry than in the economy as a whole and thus does not reflect the anticipated increase in inflation-adjusted costs of future purchases of ships with today’s capabilities.

Average Annual Costs of New-Ship Construction Under the Navy’s 2016 Plan

The Navy’s shipbuilding plan reports only the costs of new-ship construction.Other activities typically funded from the Navy’s budget accounts for ship construction—such as refueling nuclear-powered aircraft carriers or outfitting new ships with various small pieces of equipment after the ships are built and delivered—would add $1.7 billion to the Navy’s average annual shipbuilding costs under the 2016 plan, by CBO’s estimate. (Between 2010 and 2015, the cost of those other activities averaged $2.1 billion per year.) Including those extra costs would increase the average annual cost of the Navy’s 2016 plan to $20.2 billion per year, CBO estimates.

CBO’s estimate of the total cost of the Navy’s plan is 10 percent above the Navy’s estimate.

The Navy’s Shipbuilding Plan for the Next 30 Years Would Cost Almost One-Third More Than It Has Spent Over the Past 30 Years

If the Navy received the same amount of funding (in constant dollars) for new-ship construction in each of the next 30 years that it has received, on average, over the past three decades, the service would not be able to afford its 2016 plan.

CBO’s estimate of the $18.4 billion per year for new-ship construction in the Navy’s 2016 shipbuilding plan is 32 percent above the historical average annual funding of $13.9 billion (in 2015 dollars). And CBO’s estimate of $20.2 billion per year for the full cost of the plan is 28 percent higher than the $15.8 billion the Navy has spent, on average, annually over the past 30 years for all items in its shipbuilding accounts. If funding were to continue at the average for the past 30 years, under one possible approach to ship construction, the Navy would be able to build about 70 fewer battle force ships than it currently plans, CBO estimates.

Download the CBO report HERE

Gulf Island reports loss making quarter

OCTOBER 29, 2015 — Gulf Island Fabrication, Inc. (NASDAQ:GIFI) reported a net loss of $12.1 million ($ 0.84 diluted loss per share) on revenue of $67.5 million for its third quarter ended

JHSV program gets new name and another $53.4 million

 

The new name for the series is part of a change in ship type designators that began back in January when Secretary of the Navy Ray Mabus announced that the next flight of “frigatized” Littoral Combat Ships would get the FF, or frigate, designator.

Last month, the secretary brought in a new E designator that, in addition to see the Joint High Speed Vessel (JHSV) become the Expeditionary Fast Transport, or EPF, sees the Mobile Landing Platform (MLP) become the Expeditionary Transfer Dock, or ESD; and the Afloat Forward Staging Base (AFSB) variant of the MLP become the Expeditionary Mobile Base, or ESB.

The EPF will provide high speed, shallow draft transportation capability to support the intra-theater maneuver of personnel, supplies and equipment for the Navy, Marine Corps, and Army.

Austal’s new contract action allows the procurement of ship sets for the specifications supporting integrated propulsion, main diesel generator engines, propeller and shafting, integrated bridge and voice communications.

Fiscal 2015 shipbuilding and conversion (Navy) funding in the amount of $26,739,198 is being obligated at time of award and will not expire at the end of the current fiscal year.

The contract was not competitively procured in accordance with U.S. Code 2304(c)(1) – only one responsible source and no other supplies or services will satisfy agency requirements.
The Naval Sea Systems Command, Washington, DC, is the contracting activity (N00024-16-C-2217).

LOAD MORE