Subchapter M and the IRS

 

Countless Federal laws govern nearly every aspect of the inland waterways transportation industry, yet the convergence of the United States Coast Guard (USCG) Subchapter M impending Final Rule with Internal Revenue Services (IRS) Inland Waterways Excise Tax audit practices might have a more profound, far reaching impact then industry observers have as yet considered. Fortunately, it appears that taxpaying tow & barge operators may come out on top if they take full advantage of this unlikely Federal rulemaking interplay.

Background
The inland waterways constitute a 25,000 shallow-draft transportation system of which 12,000 miles are taxable Inland Waterways. This domestic waterborne transportation system is a prominent fixture in supporting key American industries such as: mining, agriculture, timber, petroleum and chemicals, cement, metal, and paper and allied products. Barging is a highly energy-efficient freighting solution that has historically been safe, congestion free, and creates a low impact land use and low pollution impact footprint. The movement of immense quantities of raw materials at low cost over long distances is the sustaining force of the waterways system. Stretching from Pennsylvania in the Northeast, to Texas in the Deep South, and Minnesota in the Heartland this “waterways highway” is a vital “import & export” network between states and an artery to foreign markets.

The economic impact in terms of product value transported between states on the inland waterways exceeds $100 billion annually. The 70,000 person inland waterways workforce underpins various industries of more than 800,000 workers. States along the inland waterways contribute 54 percent of the national population, 49 percent of GDP, 50 percent of Federal tax revenue, 56 percent of heavy manufacturing jobs, and 61 percent of agricultural jobs. Countless millions of payroll taxes are generated for Federal and State governments as a result of the inland waterways industry. The Inland Waterways Trust Fund has accrued in excess of $1.6 billion from fuel tax revenue since 1986 and is a catalyst for major construction and rehabilitation projects on the inland waterways.

Subchapter M is the result of the Coast Guard and Maritime Transportation Act of 2004 (CGMTA 2004) in which Congress authorized the Secretary of Homeland Security to create regulations for towing vessel safety management systems and hours of service for towing vessel personnel. The Towing Safety Advisory Committee (TSAC), a Federal Advisory committee to the United States Coast Guard comprised of a broad spectrum of interested parties in the inland waterways industry, established a working group to assist USCG in framing the rules required under CGTMA 2004. Over the course of six years TSAC conducted numerous public meetings that culminated in four TSAC reports submitted to USCG for review and revision. USCG published the Subchapter M Notice of Proposed Rulemaking (NPRM) in August 2011 and held four public hearings nationwide for public comment. Publication of the Sub Chapter M Final Rule is anticipated in 2016.

Objective Evidence
Objective evidence is best defined as documented statements of fact, other information or records, both quantitative and qualitative, related to the quality of an item or activity, based on observations, measurements, or verifiable tests.     

The 2011 NPRM publication set forth the U.S. Coast Guard’s intent to adopt “objective evidence” as a safety requirement through “…detailed processes, procedures, recordkeeping and auditing…” documented in “logbooks, non-conformity reports, and/or other reports of audits.”

The Internal Revenue Service applies accounting’s “Objective Evidence” standard when conducting audits of towing operators for compliance with the Inland Waterways Excise Tax as reported on IRS Form 720. A typical IRS Information Document Request (IDR) to an inland towing operator will include the vessel log, fuel purchases, maintenance records, machinery tech manuals, and fuel operating reports.

Workboat eLogs
Federal law details what entries must be made by watch officers in the vessel’s official logbook. TSAC, in a 2008 report to USCG, reinforced existing recordkeeping requirements for inland towing operators and expanded upon the increased recordkeeping burden Sub Chapter M rules will likely have from a watch officer perspective. Although Federal law does not require log entries related to geographic position, waterway conditions, or commercial activities, it does require the logging of pre-departure testing of steering & propulsion, safety items & drills, crew, and marine casualties. Log entries must be timely and are presumed accurate thus binding the vessel owner to those entries. Negating the binding effect in litigation is held to a rigorous test. The maintenance of a proper and accurate log cannot be over-emphasized as the consequences for poor onboard recordkeeping can be legally and financially catastrophic to a marine operator.

Appreciating the increased onboard recordkeeping burden Subchapter M posed, the U.S. Coast Guard provided for the automation of the onboard recordkeeping processes through definition of a towing vessel record, or workboat eLog, in Part A Section 136.110 of the NPRM. This definition allows any onboard recordkeeping or documentation of events required by Subchapter M to be “a book, notebook, or electronic record”. Thus, according to the NPRM, inland towing operators have the advantage of adopting workboat eLogs as a primary recordkeeping tool.

Workboat eLogs and Marine Enterprise Solutions
While the presence of an onboard workboat eLog offers considerable advantage to watch officers and onboard auditors, it is only through the integration of the eLog with a shoreside marine enterprise solution that its benefits can be fully realized. The ability to “push” onboard data shoreside for interrogation by various marine enterprise solution modules offers an unlimited variety of analytical models for decision makers to consider.

The two distinct audit report functions of safety (USCG) and accounting (IRS) are easily achievable within the framework of a mature, interfaced onboard/shoreside recordkeeping solution. Of course, affordability, scalability, ease of user interface, system stability, and system configurability play an irreversible role in the success of a mature marine enterprise solution. It should also be noted that the presence of Key Performance Indicator data pushed by eLogs to the marine enterprise solution and applied to an industry best practices regime can only improve asset utilization, workforce performance, and customer satisfaction.

Conclusion
The unintended opportunities facing inland waterway operators by opting into the Subchapter M onboard electronic recordkeeping options in lieu of manual recordkeeping are hard to contest. These options are greatly enhanced if the marine operator also elects to interface office accounting, safety, and personnel functions with the vessel as part of a shoreside marine enterprise solution.

Adopting a software architecture and infrastructure where the marine operator can satisfy the reporting requirements of a multitude of Federal agencies (USCG, USACOE, IRS, EPA) through a single electronic reporting system which also provides critical commercial data to the carrier, clients, vendors, and other interested third parties offers immeasurable value.

Rhine vessel results confirm effectivess of Flex tunnel

Tunnels ensure optimal water flow to the propellers at shallow drafts, but the downside of conventional tunnels is an increase in hull resistance, lower efficiency and increased fuel consumption.

Inland vessels are loaded, and therefore sail in deeper water conditions, for about 85 percent of the time, during which a tunnel is superfluous. The Flex tunnel is deployed when sailing in shallow waters to ensure sufficient water flow to the propellers and maintain their efficiency.

The first Flex tunnel installation is in the push-barge combination Rhenus Duisburg, developed by DST (Development Center for Ship Technology and Transport Systems) for Rhenus PartnerShip.

The vessel carries coal from Rotterdam to Lünen, Germany. The vessel not only has to sail with a barge linked in front, but also often has to convey two additional barges attached alongside during its passage along the Rhine.

The entire convoy makes a laden outward journey and then proceeds unladen along the Wesel-Datteln Canal. A sailing profile which is applied both while loaded and unloaded with ballast, and in deep and shallow water.The Van der Velden FlexTunnel has proven its functionality with this sailing profile.

Measurements were taken both during a trial voyage and in regular service. The vessel sailed in a range of circumstances, both loaded and unloaded, and at various speeds.

“The functionality was subjected to extensive trials at all speeds, and the measurements taken invariably remained within the design margins, which implies that there are no restrictions on the use of Van der Velden Flex tunnels at any speed whatsoever,” says Van der Velden. “As expected, the results confirm that extremely high vacuum levels are achieved with a deployed tunnel, which implies that the Van der Velden Flex tunnel is ideally suited for use with unladen vessels. The airtight seals on the thrusters and the hull ensure that there is sufficient water surrounding the propellers, thus avoiding any loss of output due to propellers breaching the surface of the water.”

The Flex tunnel enables the fitting of large, 2,000 mm propellers, improving propulsion and reducing fuel consumption as a direct result.

The initial findings, based on analysis of the measured data and comparison with vessels with conventional tunnels, suggest that the Rhenus Duisburg achieved around 27% lower energy consumption.

This high output is linked to application of the Van der Velden Flex tunnel, which in turn enables optimum stern design for the vessel’s operating area.

DST not only designed the underwater hull, but also subjected it to extensive tests. The model test reports predicted the actual circumstances almost exactly, which underscores the quality of the development institute’s model tests.

Van der Velden Marine Systems had initially expressed a cautious estimate of energy savings between 10 and 20%, but says the provisional results “actually proved surprisingly high. “

Rhenus Duisburg FLEX Tunnel 3 posities

New thruster targets inland waterways market

Among innovations incorporated into the WST-14 are its space-saving compact design, an integrated slipping clutch that provides a cost competitive solution for maneuvering when combined with a fixed pitch (FP) propeller, and the ability to maintain and service the propeller shaft and steering seals without requiring a complete overhaul of the thruster. It has a straightforward, reliable design and is ice-class rated.

By combining the 6-cylinder in-line Wärtsilä 20 engine with the WST-14 thruster, a solution package that is well-suited to the specific demands of river and inland waterway operation can be offered. It also attractive for other marine applications, such as tugs, where maneuvering in harbors and/or ice conditions is required.  

Wärtsilä says that, compared to conventional fixed pitch (FP) and controllable pitch (CP) propeller drive line solutions, the WST-14 thruster enables a greater load capacity for the vessel. This offers increased revenues for the owner/operator since more cargo can be transported.

“This project began two years ago and we are delighted to announce that the WST-14 is now available to the market. This introduction fills a particular need in the inland waterway vessel sector, and it is already attracting interest from owners and yards in Asia, Europe and America. Wärtsilä is now able to offer a complete and highly efficient propulsion package for this specific market,” says Arto Lehtinen, Vice President, Propulsion, Wärtsilä Marine Solutions.

The WST-14 will be featured at the Neva exhibition to be held in St.Petersburg, Russia, September 22-25, 2015.

Wärtsilä 20 engine with the WST-14 thruster

WST14 W6L20

Eastern to build four inland towboats for Latin America

AUGUST 20, 2015 – Eastern Shipbuilding Group, Inc., Panama City, FL, has won a contract from IWL River, Inc., an affiliate of Impala Terminals Colombia. It covers the construction of four 134

Wärtsilä teams with Cryopac on waterways LNG fueling

FEBRUARY 16, 2015 — Wärtsilä has reached an agreement with Cryonorm Systems BV, a Netherlands based developer and supplier of cryogenic vaporizers, to form a consortium to deliver LNG systems for the

Vane gets $24.5 mod to Transcom contract

SEPTEMBER 30, 2014 — Vane Line Bunkering, Inc., Baltimore, MD, has been awarded a $24,525,123 modification (P00005) to previously awarded contract HTC711-13-C-W015, exercising the second option year for transportation of bulk jet

Ingram Barge makes Senior VP appointment

AUGUST 28, 2013 —  Craig E. Philip, Chief Executive Officer, Ingram Barge Company today announced the addition of Kim W. Nowell as Senior Vice President, Human Resources. Kim W. Nowell “Kim brings

ABS forms Global Gas Solutions Team

AUGUST 26, 2013 — “The discovery of new gas resources around the world and the exciting potential for wide-scale adoption of gas as a marine fuel are leading to a dynamic shift

ACL in multi-year agreement to carry Exxon Mobil cargoes

JANUARY 31, 2013 — Jeffersonville, IN, headquartered American Commercial Lines reports that has entered into an agreement with Exxon Mobil’s SeaRiver Maritime Inc. to provide petroleum barge transportation services on the U.S.

ACL to transport Canadian crude on U.S. waterways

DECEMBER 19, 2012 — American Commercial Lines (ACL) reports that it will begin transporting crude oil by barge on the U.S. inland waterways for MEG Energy (U.S.) Inc. (MEG Energy), a subsidiary

LOAD MORE