NTSB reports on $72.9 million oil platform strike by tanker

Written by Nick Blenkey
image description

NTSB seal

A tanker operating company’s decision to change masters without a handover period led to a $72.9 million marine accident, according to a National Transportation Safety Board (NTSB) Marine Accident Brief.

Marine Accident Brief 21/24 details the NTSB’s investigation of the October 17, 2020, striking of the oil and gas production platform SP-57B by the 159,500 dwt Maltese-flag tanker Atina near Pilottown, La.

According to the NTSB brief, the Atina was owned by Hanzhou 1 Ltd. and operated by Istanbul, Turkey-headquartered Besiktas Likid Tasimacilik Denizcilik Ticaret Anonim Sirketi. The platform as owned and operated by Cox Operating LLC.

The Atina, with a crew of 21, was attempting to anchor in the Southwest Pass Fairway Anchorage in the Gulf of Mexico when it struck platform SP-57B. The platform’s four crewmembers and one technician evacuated to a nearby platform by helicopter after activating the emergency shutdown device to shut in wells to the SP-57B platform. No pollution or injuries were reported. Estimated damages to the platform ($72.3 million) and ship ($598,400) totaled $72.9 million.

​In its report the NTSB says that Besiktas did not comply with its own safety management system (SMS). The accident master boarded the underway vessel outbound to the anchorage, only seeing the departing master on the tanker’s deck. The company placed the accident master into critical vessel evolutions, such as navigating downriver and anchoring at night, without any overlap with the departing master.

The company’s SMS required a minimum one-day turnover between senior personnel aboard a company vessel if the oncoming senior person worked for the company, and seven days if the senior person was new to the company.

NO SLEEP FOR 50 HOURS

According to the report, the accident master told investigators he wanted to anchor the ship as soon as possible because he was tired. The accident master traveled from Turkey to join the vessel and told investigators he had no sleep for over 50 hours while traveling.

The location he chose did not follow the passage plan anchoring location. According to Atina’s passage plan, the tanker’s intended anchorage was about 3.2 miles northeast of SP-57B. The actual anchoring location was about 0.7 miles from platform SP-57B.

Investigators determined the probable cause of the contact of the tanker with the production platform was the Atina’s operating company not ensuring sufficient time for the master’s turnover, which resulted in the master’s acute fatigue and poor situation awareness during an attempted nighttime anchoring evolution.

​“Vessel operating companies should ensure that joining crewmembers/personnel are given the opportunity to obtain a sufficient handover period and adequate rest before taking over critical shipboard duties, such as navigation, that could impact the safety of crew, property, and the environment,” the report said. In this case, “an overlap would have allowed for the incoming master to rest and receive his counterpart’s handover information.”

Download Marine Accident Brief 21/24

Categories: News, Oil & Gas, Safety and Security, Shipping Tags: , , , , , ,