ICS backs plan to delay BWMS implementation for existing ships

Peter Hinchliffe, ICS Secretary-General, says proposal would allow shipping companies to identify and invest in far more robust technology to the benefit of the marine environment Peter Hinchliffe, ICS Secretary-General, says proposal would allow shipping companies to identify and invest in far more robust technology to the benefit of the marine environment

UNE 19, 2017 — The global shipping industry—as represented by the International Chamber of Shipping (ICS) — is backing a proposal to delay implementation of the IMO Ballast Water Management convention for existing ships.

The proposal is being put to IMO by Brazil, the Cook Islands, India, Norway, Liberia and the U.K. It would push the date by which existing ships are required to start fitting ballast water management systems by a further two years to the date of their first IOPP renewal survey on or after September 8, 2019. This would extend the date by which all ships must have installed a system to 2024 from 2022.

"If this pragmatic proposal is agreed, this would allow shipping companies to identify and invest in far more robust technology to the benefit of the marine environment," said ICS Secretary General, Peter Hinchliffe.

ICS says that this IMO decision on dates, to be taken by a meeting of the Marine Environment Protection Committee during the first week of July – just two months before the entry into force of the IMO Ballast Water Management (BWM) Convention on September 8. 2017 – will be critical, having significant implications for around 40,000 existing ships.

The BWM Convention, as currently drafted, requires existing ships to retrofit the complex new systems by their first International Oil Pollution Prevention (IOPP) survey following the global entry into force of the new regulations.

ICS insists there is no logic, from an environmental protection standpoint, in requiring thousands of ships in the existing fleet to comply until they can be fitted with systems that have been approved under the more stringent type-approval standards which were only adopted by IMO in 2016 (and which are about to be included in what will soon become a mandatory Code for Approval of Ballast Water Management Systems).

ICS notes that these more environmentally robust standards will not become mandatory for new system approvals until October 2018 and that only systems being installed into ships from October 2020 will be required to have been approved in accordance with the new Code.

Because of a lack of confidence in the existing IMO type-approval process, and tprevious uncertainty as to when the Convention would enter into force, very few existing ships have so far been retrofitted with the required treatment systems, creating a log jam in available shipyard capacity.

ICS says that apart from the possible shortage of shipyard and manufacturing capacity to retrofit around 40,000 systems, many shipping companies – through no fault of their own – face difficult decisions. They will potentially be required to install expensive new equipment that may not be guaranteed to operate correctly in all of the normal operating conditions they would reasonably be expected to face when ballasting and de-ballasting during worldwide service. These decisions are all the more difficult if the ships are approaching the end of their typical 25 year life.

"It is vital that IMO makes a definite decision about the implementation schedule at its meeting in July so that shipping companies have absolute clarity and can take sensible decisions about when to install these high cost systems in the best interests of the environment," said Mr. Hinchliffe.

Want more? Subscribe now!

Join Marine Log's Email List



News from NASDAQ