Wärtsilä introduces RT-flex50 version that fits ships with slim stern sections

RTFlex50JUNE 13, 2012 — Wärtsilä has successfully tested a new RT-flex50 version D low-speed engine with the turbocharger on driving end side. With the addition of this engine, Wärtsilä now has an additional two-stroke engine that can be fitted to smaller vessel types. The derated engine runs at lower rpm's and features reduced fuel consumption, thereby enabling lower emission values to be achieved – including smokeless operation, especially at low engine load.

The RT-flex50 version D engine with turbocharger on the driving end side expands the possible applications of Wärtsilä two-stroke engines with 50 cm cylinder bore for new vessel constructions.

Due to its narrow design, the new engine version will be used for ship designs with slim stern sections where the current standard execution, with turbochargers mounted on the exhaust engine side, does not fit. The version D can thus be used instead of engine types featuring a smaller cylinder bore and higher speed.

In many cases the higher performance of the cylinders allows the use of one less cylinder and can, for example, reduce maintenance costs. Thanks to the low speed of the engine and propeller, the total fuel consumption of the vessel is considerably reduced.

"With the new RT-flex50 version D, Wärtsilä completes its product range in this market segment. This engine opens new market potential for Wärtsilä two-stroke engines," says Martin Wernli, President, Wärtsilä Switzerland and Vice President, Product Center two-stroke.

The Wärtsilä RT-flex50 is a low speed, two-stroke engine with fully electronic control of the exhaust valve activation and fuel injection. It is designed to operate on a wide range of fuels, from marine diesel oil (MDO) to heavy fuel oil (HFO), of different qualities.

The TC on the new engine is positioned directly above the fly wheel at the driving end of the engine to save space. Typical applications would be in small bulker and tanker vessels, handysize  and container vessels, and feeder ships.

Most engine components for the existing RT-flex50 version D TC exhaust side and the new RT-flex50 version D with TC on the driving end side, are the same. This makes the new product attractive for owners with RT-flex50 type engines already in their fleet, since there is a commonality of spare parts.

Testing of the engine took place at Wärtsilä's licensee Hyundai Heavy Industries in South Korea, and was completed in April 2012.

Want more? Subscribe now!

News from NASDAQ